Allied Telesis AT-WL2411 User Manual
Page 145
AT-WL2411 Version 1.80 Installation and User’s Guide
145
RADIUS Server #1 IP Address
Enter the IP address of the password server that you want to use
to authenticate user logins.
RADIUS Server #1 Secret Key
Enter the shared secret key for the password server. You can enter
the key from 1 to 32 characters in ASCII or in hexadecimal. To enter
a hexadecimal key, it must start with 0x. For example, enter the
ASCII key as ABCDE; enter the same hexadecimal key as
0x4142434445.
RADIUS Server #2 IP Address
Enter the IP address of the backup password server that you want
to use to authenticate user logins if RADIUS server #1 is
unavailable.
RADIUS Server #2 Secret Key
Enter the shared secret key for the backup password server. You
can enter the key from 1 to 32 characters in ASCII or in
hexadecimal. To enter a hexadecimal key, it must start with 0x. For
example, enter the ASCII key as ABCDE; enter the same
hexadecimal key as 0x4142434445.
Allow Service Password
If RADIUS servers #1 and #2 are unavailable, check this check box
to allow the login to be checked against the service password.
Allied Telesyn Technical Support may use this service password if
they need to troubleshoot this access point.
4. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar click then
Save Changes and Reboot. For help, see
5. Configure the password server by:
a. (Optional) If you change the default shared secret key, enter each
access point as a RADIUS client and enter the shared secret key.
b. Enter the user name and password for each user that is allowed to
log in to this access point.
For help configuring an external RADIUS server, see the documentation
that shipped with your server.