Allied Telesis AT-WL2411 - Manual (Page 139)

AT-WL2411 Version 1.80 Installation and User’s Guide
139
Enabling Access Methods
There are four access methods that you can enable or disable depending
on how you want users to be able to configure or manage the access
points:
❑ Web browser interface (HTTP or HTTPS)
❑ Telnet session
❑ SNMP management station
❑ Program that uses ICMP echo
All access methods are enabled by default. You may want to disable any
of these methods that you will not use to prevent access by an
unauthorized method.
To enable or disable access methods, perform the following procedure:
1. From the Main Menu, click Security. The Security screen as shown in
Figure 54 is displayed.
2.
Figure 54 Security Screen