Allied Telesis AT-WL2411 - Manual (Page 151)

AT-WL2411 Version 1.80 Installation and User’s Guide
151
Using an Access Control List (ACL)
You can use an Access Control List (ACL) to list the MAC addresses that
are authorized to communicate with the network through the access
point. The end devices do not need any special client software.
To use the ACL, you must have
❑ a RADIUS server on the network that contains the ACL.
❑ access points, which are the RADIUS clients.
To configure an Access Control List (ACL), perform the following
procedure:
1. From the Main Menu, select Security then ACL. The ACL screen as
shown in Figure 58 is displayed.
2.
Figure 58 ACL Screen
3. In the ACL Client Authorization field, select the down arrow on the
right side of the field. Choose which radio network that will use the
ACL or choose All Radios.