Allied Telesis AT-WL2411 - Manual (Page 177)

AT-WL2411 Version 1.80 Installation and User’s Guide
177
Security
This section helps you troubleshoot problems you may have while
installing and configuring security in your network. For more help
troubleshooting 802.1x security, refer to the documentation for the
MobileLAN secure 802.1x security solution, the Odyssey server, and the
end devices.
Viewing the
Security Events
Log
The access point logs a variety of 802.1x events in its Security Events log.
Only the access point that generates the security event displays it in its
Security Events log.
To see all the 802.1x events in your network, you need to use MobileLAN
manager or another SNMP management station or network
management tool.
To view the Security Events log, perform the following procedure:
1. From the Main Menu, select Security then Security Events. The
Security Events Log descriptions are described below.
MAC Address
Ethernet MAC address of the device that caused the event.
IP Address
IP address of the device that caused the event.
Priority
Priority of the event (critical, high, low, informative).
Trap
Specifies if the event generated an SNMP-reliable trap. Any event
with a priority of critical or high will generate an SNMP reliable
trap.
Count
Number of times the event occurred.
Type
Details of the event that occurred.
Age
Amount of time that has passed since the event occurred.
Note
If you use an SNMP management station or another network
management tool, the age represents how much time has passed
since the access point was booted that this event occurred.