Allied Telesis AT-WL2411 - Manual (Page 195)

AT-WL2411 Version 1.80 Installation and User’s Guide
195
Using Console Command Mode
Another way you can access the access point file system is through
Console Command mode. Use Console Command mode to upgrade
access points using TFTP and Script files.
To enter Console Command mode, perform the following procedure:
1. Select Command Console from the Maintenance menu.
When you first enter Console Command mode, a list of valid
console commands appears. You can display the console
commands any time you are in Console Command mode.
2. To display console commands, type F and press . The
following screen appears.
3. To exit Console Command mode, type exit and press .
Several file menu commands require that you enter file names. To
indicate the segment where the file is located, precede the file
name with either a segment number or name followed by a colon.
For example:
1:access point.prg
refers to the file named access point.PRG that is located in
segment 1. If you do not specify a segment name or number, the
access point searches the segments in the following order until it
finds a file that matches the file name:
RAM, 1, 2, 3, 4
Command Description
======= ===========
Fb fb
Fd fd ( | all) - directory list
Fdel fdel - delete file
Fe fe ( | all) - erase
segment(s)
Tftp File transfer
Script Execute script files
SDVars Software Download variables
Exit Return to main menu
? Display this help