Allied Telesis AT-WL2411 - Manual (Page 120)

Configuring the IEEE 802.11b Radio
120
5. From the Main Menu, select Spanning Tree Settings. The Spanning
Tree Settings screen as shown in Figure 46 is displayed.
Figure 46 Spanning Tree Settings Screen
6. In the Root Priority field, enter 0 or another number lower than the
root priority that is set in the master in the access point on the
primary LAN.
7. In the Secondary LAN Bridge Priority field, enter a number higher
that the bridge priority that is set in the master in the access point on
the primary LAN.
8. Select the down arrow on the right side of the Secondary LAN
Flooding field and choose Enabled.
9. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar and then
Save Changes and Reboot. For help, see
Saving Your Configuration
Changes on page 46.