beautypg.com

Allied Telesis AT-WL2411 User Manual

Page 119

background image

AT-WL2411 Version 1.80 Installation and User’s Guide

119

To configure the station (in the point-to-point bridge on the secondary
LAN), perform the following procedure:

1.

From the Main Menu, select the link corresponding to the radio that
you are configuring.

2.

Select IEEE 802.11b Radio. The IEEE 802.11b Radio screen as shown
in Figure 45 is displayed.

Figure 45 Wireless Bridging Screen

3.

Select the down arrow on the right side of the Node Type field and
choose Station. Wireless hops are automatically disabled.

4.

Select Submit changes to save your changes.

See also other documents in the category Allied Telesis Computer hardware: