Allied Telesis AT-WL2411 - Manual (Page 142)

Configuring Security
142
2.
Figure 55 802.1x Screen
3. Select the down arrow on the right side of the Authentication field
and choose IAPP Only.
4. In the IAPP Secret Key field, enter a secret key. This secret key must be
between 16 and 32 bytes.
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see
Saving Your Configuration
Changes on page 46.
6. Repeat Steps 1 through 4 for each access point in your spanning tree.
All access points must have the same IAPP secret key to communicate
with each other.
In the access point that contains the master radio, select Maintenance
then AP Connections. The AP Connections screen lists the station radios
(including ones in other access points) that are communicating with the
master radio. For help, see
Viewing Access Point Connections on page
160.