Allied Telesis AT-WL2411 - Manual (Page 197)

AT-WL2411 Version 1.80 Installation and User’s Guide
197
fd Purpose
Use the fd command to display the flash file system directory, which
includes information about the boot file.
Syntax
fd
Use the fd command to ensure that the correct version of the file is in the
active boot segment.
Typing fd ab: shows only the files loaded in the active boot segment.
Note
If the active segment contains no files when you reboot the access
point, the unit enters the access point monitor and you lose the
ability to Telnet to it during this session. If this occurs, you must
access the access point through its serial port to correct the
problem.
fdel Purpose
Use the fdel command to delete a particular file name from a segment.
Syntax
fdel filename
where filename is the name of the file to be deleted.
Example
To delete the file access point.PRG from the inactive boot segment,
enter:
fdel ib:access point.prg
Note
When you use the fdel command, the file is marked as invalid and
remains in the file system. To reclaim the file space, you must erase
the entire segment. Use the fe command to erase a segment.