Allied Telesis AT-WL2411 - Manual (Page 73)

AT-WL2411 Version 1.80 Installation and User’s Guide
73
Configuring
Advanced
Filters
You can configure advanced filters if you need more flexibility in your
filtering. Settings for advanced filters execute after those for other filters;
that is, advanced filters are only applied if the frame has passed the
other filters.
You can use filter values and filter expressions to minimize network
traffic over the wireless links; however, it is recommended that you use
advanced Ethernet filters only if you have an extensive understanding of
network frames and their contents. Use other existing filters whenever
possible.
Setting Filter
Values
You can associate an ID with a pattern value by selecting a filter and then
entering an ID and a value. All values with the same value ID belong to
the same list.
To set the value ID and value, perform the following procedure:
1. From the Main Menu, select Ethernet then Advanced Filters.
2. Select Filter Values. The Filter Values screen as shown in Figure 26 is
displayed.
Figure 26 Filter Values Screen
3. You can enter up to 22 Value IDs and Values.