Allied Telesis AT-WL2411 - Manual (Page 122)

Configuring the IEEE 802.11b Radio
122
a. From the Main Menu, select Spanning Tree Settings. The
Spanning Tree Setting screen as displayed.
b. In the Root Priority field enter 0.
c. In the Secondary LAN Bridge Priority field, enter a number other
than zero.
d. Select the down arrow on the right side of the Secondary LAN
Flooding field and choose Enabled.
Figure 48 Spanning Tree Settings Screen
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar and then
select Save Changes and Reboot. For help, see
Saving Your
Configuration Changes on page 46.
6. Configure the master in the point-to-point bridge on the primary
LAN by performing the procedure below: