Allied Telesis AT-WL2411 User Manual

Page 31

AT-WL2411 Version 1.80 Installation and User’s Guide

4. Fit the slots on the back of the AT-WL2411 over the hooks on the

mounting bracket.

5. Slide the AT-WL2411 up slightly and then press the base of the

AT-WL2411 until it clicks into the clip at the bottom of the wall-
mounting bracket.

6. Using the guidelines below, position the antenna accordingly. See to

❑ Place the antenna at 90° when using the AT-WL2411 horizontally;

for instance, on a desk or counter.

❑ Place the antenna at 180° when using the AT-WL2411 vertically;

for instance, mounted on a wall or cubicle.

Note

Keep the antenna at 0° when in storage.

Figure 8 Positioning the Antenna

Note

Do not force the antenna past the 0° or 180° or you may break the
antenna connector.

7. Attach the data cable to the unit by, first connecting the Ethernet

cable to the Ethernet port on the access point and then attach the
other end of the cable to your Ethernet network.

180