Allied Telesis AT-WL2411 - Manual (Page 207)

AT-WL2411 Version 1.80 Installation and User’s Guide
207
tftp server log Purpose
Your access point can function as a TFTP server. You can use the TFTP
server log command to save a history of TFTP client requests.
Syntax
tftp server log
The TFTP server log contains useful TFTP server status information. The
log begins when you set up the server. You must reboot the access point
to clear the log.
tftp server start Purpose
A access point can obtain files from a TFTP server. You can enable one
access point to act as a TFTP server and download files to additional
access points. Use the TFTP server start command to enable your access
point to act as a server.
Syntax
tftp server start
After you issue this command, the access point responds to TFTP client
requests that are directed to its IP address. When acting as a server, the
access point supports up to four concurrent TFTP sessions.
tftp server stop Purpose
When you are done transferring files, you can stop the access point from
being a TFTP server by using the TFTP server stop command.
Syntax
tftp server stop
After you issue this command, the access point no longer responds to
TFTP client requests; however, current TFTP sessions with the server are
allowed to complete.