Allied Telesis AT-S97 - Manual (Page 97)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
97
An example of the information is shown in Figure 11.
Figure 11. SYSTEM SHOW CHASSIS Command
The columns are defined here:
ˆ Chassis ID - The identification number of the chassis. For information,
refer to “Setting Chassis ID Numbers” on page 18.
ˆ Chassis Name - The name of the chassis, set with the SYSTEM SET
CHASSIS command. For information, refer to “SYSTEM SET
CHASSIS” on page 59.
ˆ Chassis Type - The chassis’ model name.
ˆ MAC Address - The chassis’ MAC address.
ˆ Master Chassis - Whether the chassis is the master chassis of a stack.
To be the master chassis of a stack, the status of the chassis’
management module must be set to active. Possible status are:
– Yes: The status of the management module in the
chassis is active, making it the master chassis of the
stack.
– No: The chassis has a stacking module.
ˆ Slot ID: A slot in the chassis. Possible values are:
– M: The management slot, used for the AT-MCF2000M
Management Module and the AT-MCF2000S Stacking
Module.
– number: A media converter slot number (for example,
1, 2, etc.). An empty slot is not included in the table.
ˆ Module Name: The name of the module, set with the“SYSTEM SET
MODULE” on page 86.
ˆ Module Type - The module’s model name.
ˆ Software Version - The version number of the module’s AT-S85 or
AT-S97 Management Software.
Chassis Chassis Chassis MAC Master
ID Name Type Address Chassis
------------------------------------------------------------------
0 AT-MCF2000 11:22:33:44:55:55 Yes
Slot ID Module Name Module Type Cfg Overwrite Software Version
---------------------------------------------------------------------
M AT-MCF2000M v2.0.0
1 AT-MCF2012LC Disable v2.0.0
2 AT-MCF2012LC Disable v2.0.0
A AT-MCF2KFAN - -
B AT-MCF2000AC - -