Allied Telesis AT-S97 - Manual (Page 105)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
105
Description of the Chassis, Slot, and Channel Command
To view the operating parameters of the channel’s two ports, including the
speeds and duplex modes, specify a channel number in the command.
You can view only one channel at a time. Figure 15 is an example of the
information.
Copper Online Both ports in the channel have
established a link with a
network device.
Fiber Online
Copper TX SML The twisted pair port of the
channel can establish a link
with its network device, but the
fiber optic port is unable to
establish a link with its remote
device.
Fiber Offline
Copper Offline The fiber optic port of a
channel can establish a link
with its network device, but the
twisted pair port is unable to
establish a link with its local
device.
Fiber TX SML
Twisted Pair
Port TX or RX
SML Both ports in the channel can
establish a link to a network
device, but one of the ports is
connected to another media
converter that also supports
the Smart MissingLink feature,
forming a chain of converters.
A link has been lost on one of
the ports in the chain, causing
a ripple affect through the
chain of converters.
Fiber Optic Port TX or RX
SML
Table 6. Port Status in the Smart Missing Link Mode (Continued)
Channel Port Status Description