beautypg.com

Ntp show, Figure 19: ntp show command – Allied Telesis AT-S97 User Manual

Page 119

background image

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

119

NTP SHOW

Syntax

ntp show

Parameters

None.

Privilege Levels

Administrator, read-write, and read-only.

Description

This command displays the status of the NTP client on the management
module and the IP address of the NTP server, as shown in Figure 19.

Figure 19. NTP SHOW Command

Example

This following command displays NTP client status and the IP address of
the NTP server:

ntp show

NTP Information:

Status ............. Disable
Server ............. 0.0.0.0

This manual is related to the following products: