Allied Telesis AT-S97 - Manual (Page 183)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
183
FILE FASTDOWNLOAD
Syntax
file fastdownload appblock|bootblock srcfile=tftp|xmodem://
ipaddress / filename
Parameters
appblock Designates the area of flash memory reserved for the
AT-S85 and AT-S97 Management Software.
bootblock Designates the area of flash memory reserved for the
AT-S85 and AT-S97 boot loader files.
srcfile=tftp Specifies the IP address of the TFTP or Xmodem server
and the name of the file to download to a module. This
parameter has the following parts:
ipaddress Specifies the IP address of the TFTP or
Xmodem server.
filename Specifies the name of the file on the TFTP or
Xmodem server to download onto the
management module or a media converter
module. Enclose the filename in double
quotes if it contains a space. The filename
extension must be “.BIN” for the boot loader,
“.IMG” for the management software, and
“.CFG” for a configuration file.
Privilege Levels
Administrator and read-write.
General Description
This command downloads bootloader and image files to the media
converter modules in a chassis or all of the media converter modules in a
stack from a TFTP or Xmodem server. There are two commands you can
use to download a file:
ˆ FILE FASTDOWNLOAD command
ˆ FILE DOWNLOAD command
The difference between the two commands is that the FILE
FASTDOWNLOAD command only permits you to download bootloader
and image files onto all of the media converter modules. The FILE
DOWNLOAD command permits you to download bootloader,