Allied Telesis AT-S97 User Manual
Page 137
AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
137
Stacking Port Link
A Stack port on the management module or
the AT-MCF2000S Stacking Module
established or lost its link to another Stack
port.
Report
Major Level Messages
Chassis Managership
Acquire
A media converter module has acquired the
second priority to the CMN_Grant which
allows access to the I2C bus.
Report
Chassis Managership
Release
A media converter module has released the
second priority to the CMN_Grant.
Report
Chassis Reset
The chassis was reset with the SYSTEM
RESET CHASSIS command.
Report
Cold Boot
A media converter module loaded its boot
loader and management software after
receiving power. It generates this message
when the chassis is powered on or if it is
installed while a unit is powered on.
Report
Fan # Failure
A cooling fan in a power supply or fan
module stopped.
Report
A cooling fan resumed operating after having
stopped.
Clear
High Temperature
Threshold
A module’s operating temperature exceeded
the temperature threshold set with the
SYSTEM SET MODULE command.
Report
A module’s operating temperature returned
below its temperature threshold.
Clear
Module Reset
A media converter module started the
process of initializing its boot loader and
AT-S85 Management Software after it was
reset with the SYSTEM RESET MODULE
command. The completion of the initialization
process is signaled with the Warm Boot
message.
Report
Warm Boot
A media converter module completed the
initialization of its management software after
being reset with the SYSTEM RESET
MODULE command.
Report
Table 11. Event Messages (Continued)
Message
Definition
Classification