Allied Telesis AT-S97 - Manual (Page 207)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
207
SNMP SHOW
Syntax
snmp show
Parameters
None.
Privilege Levels
Administrator, read-write and read-only
Description
This command displays the current status of the SNMP feature on the
media converter. An example is shown in Figure 39.
Figure 39. SNMP SHOW Command
Example
The following command displays the status of SNMP on the media
converter:
snmp show
SNMP Information:
Get Community...............public
Set Community...............private
TrapCommunity...............public
Manager 1 IP address........0.0.0.0
Manager 2 IP address........0.0.0.0
Manager 3 IP address........0.0.0.0
Manager 4 IP address........0.0.0.0