Allied Telesis AT-S97 - Manual (Page 56)

Chapter 5: General System Commands
56
Overview
The system commands are divided into two groups in this manual. The
first set of commands, described in this chapter, control and display the
basic parameters on the management module, such as the chassis’ name
and the date and time.
The commands in the second group control the individual ports and
channels on the media converter modules. These functions include setting
port parameters, such as speed and duplex mode, resetting media
converter modules, and displaying status information on the modules in a
chassis or stack. The system commands in this group are described in
Chapter 6, “Port and Module Commands” on page 69.
Command
Summary
Table 2 summarizes the general system commands described in this
chapter.
Table 2. General System Configuration Commands
Command Description
“SYSTEM SET
ASYNCHRONOUS” on
page 58 Sets the baud rate of the RS-232
Terminal port on the management
module.
“SYSTEM SET CHASSIS” on
page 59 Assigns a name to a chassis.
“SYSTEM SET CLOCK” on
page 60 Manually sets the date and time.
“SYSTEM SET CONSOLE” on
page 61 Sets the console timeout
parameter for ending inactive
management sessions.
“SYSTEM SET CONTACT” on
page 62 Identifies the network
administrator responsible for
maintaining the chassis or stack.
“SYSTEM SET HOSTNAME”
on page 63 Specifies a name for the stack.
“SYSTEM SET LOCATION” on
page 64 Specifies the location of the stack.
“SYSTEM SHOW
ASYNCHRONOUS” on
page 65 Displays the baud rate of the RS-
232 Terminal port on the
management module.
“SYSTEM SHOW CLOCK” on
page 66 Displays the date and time.