Allied Telesis AT-S97 - Manual (Page 149)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
149
Telnet and SSH Configuration
This section controls the Telnet and SSH servers for remote management
of the chassis from a Telnet or SSH client.
Figure 28. Telnet and SSH Configuration Section
This section accepts the following commands:
ˆ “TELNET DISABLE” on page 198
ˆ “TELNET ENABLE” on page 199
ˆ “SSH DISABLE” on page 212
ˆ “SSH ENABLE” on page 213
User Configuration
This section controls the manager accounts.
Figure 29. User Configuration Section
Note
Do not modify existing manager accounts or add new accounts by
editing the master configuration file. Instead, use the command line
interface in the management software. You can delete accounts by
deleting the corresponding line in the file, but do not delete the
predefined manager account (that is, NAME=MANAGER). For
further information, refer to Chapter 14, “Manager Account
Commands” on page 215.
Blade Configuration
This section controls the operating parameters of the channels and ports
on a media converter module. A master configuration file will have a
separate Blade Configuration section for each media converter module in
the chassis or stack.
### Telnet & SSH Configuration
telnet disable
ssh disable
### User Configuration
user config name=manager priv=admin pwd=3af00c6cad11f7ab5db4467b66ce503eff