Allied Telesis AT-S97 - Manual (Page 173)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
173
FILE DELETE
Syntax
file delete filesystem=system:// chassis / slot / filename .cfg
Parameter
system Specifies the location of the file to delete. This parameter
has the following parts:
chassis Specifies the ID number of the chassis with
the file. The value of the ID number is either
0 or 31.
slot Identifies the slot with the module containing
the file. Possible values are:
m Identifies the management
module slot with the
AT-MCF2000M Management
Module.
1 or 2 Specifies a slot number of a
media converter module. In the
AT-MCF2000 Chassis, the left
slot is 1 and the right slot is 2.
filename.cfg Specifies the name of the configuration file
to delete. The filename is case sensitive and
must be enclosed in double quotes if it
contains a space. The asterisk (*) can be
used as a wildcard to delete files with similar
names.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 96 or “SYSTEM
SHOW CLUSTER” on page 99. To view the filenames in
the file system on a module, refer to “FILE SHOW” on
page 188.
Privilege Levels
Administrator and read-write.