Allied Telesis AT-S97 - Manual (Page 62)

Chapter 5: General System Commands
62
SYSTEM SET CONTACT
Syntax
system set contact= contact
Parameter
contact Specifies the name of the network administrator
responsible for maintaining the chassis. The contact can be
up to 25 alphanumeric characters. Spaces are allowed, but
a name with spaces must be enclosed in double quotes
(“ “). To remove the current value without specifying a new
value, enter “none.”
Privilege Levels
Administrator and read-write.
Description
This command sets the name of the network administrator responsible for
managing the chassis. To view this parameter’s current value, refer to
“SYSTEM SHOW INFO” on page 68.
Example
This command sets a chassis’ contact to “Jane Smith:”
system set contact="Jane Smith"