Allied Telesis AT-S97 - Manual (Page 39)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
39
Setting Up Stacking
When creating a stack, you need to designate a master chassis and from
one to seven member chassis. The management module has a chassis id
of 0 which automatically designates this chassis as the master chassis of
the stack by default. For instructions about how to move the jumper, see
“Setting Chassis ID Numbers” on page 18.
To designate a member unit, set the chassis ID of each stacking module to
1 through 30 by moving DIP switches on the module. You must assign a
unique chassis ID to each member chassis.
To view the chassis IDs of the master and member chassis, use the
SHOW CLUSTER command. See “SYSTEM SHOW CLUSTER” on
page 99.