Allied Telesis AT-S97 - Manual (Page 95)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
95
This command disables all the twisted pair ports in the media converter
module in slot 1. The chassis has the ID number of 1:
system set port id=1/1/a port-state=disable
This command sets the duplex mode to half-duplex for all the fiber optic
ports in the media converter module in slot 2. The chassis has the ID
number of 1:
system set port id=1/2/b duplex=half
The SYSTEM SET PORT command can also be used to configure the 10/
100/1000Base-T Management port on the management module. This
example disables Auto-Negotiation on the port and sets it to 100 Mbps,
full-duplex. The chassis has the ID number of 0:
system set port id=0/m auto-neg=disable speed=100
duplex=full