Allied Telesis AT-S97 User Manual
Page 230
Chapter 15: Diagnostics Commands
230
Note
The AT-MCF2000S Stacking Module is not displayed.
Module Name - Indicates the name of the module. Refer to “SYSTEM
SET MODULE” on page 86 for instructions on assigning a name to a
module.
Module Type - Indicates the model name.
Serial Number - Indicates the chassis or module’s serial number.
HW Rev. - Indicates the chassis or module’s hardware revision level.
MAC Address - Indicates the chassis or module’s MAC address.
Examples
This command displays the serial numbers, hardware version numbers,
and MAC addresses of the modules in a chassis with the an ID of 0:
diagnostics show chassis id=0 eeprom
This command displays the version numbers of the AT-S85 and AT-S97
Management Software in a chassis with the an ID of 0:
diagnostics show chassis id=0 software