Allied Telesis AT-S97 - Manual (Page 96)

Chapter 6: Port and Module Commands
96
SYSTEM SHOW CHASSIS
Syntax
system show chassis id= chassis
Parameters
chassis Identifies the ID number of the chassis. The chassis ID
number depends on which module is installed in the
management slot of the chassis. When a management
module is installed in this slot, the chassis ID number is
either 0 or 31. When a stacking module is installed in this
slot, the range of the chassis ID is from 1 to 30.
To view the ID number of a unit, use the SYSTEM SHOW
CLUSTER command. For instructions, refer to “SYSTEM
SHOW CLUSTER” on page 99.
Privilege Levels
Administrator, read-write and read-only.
Description
This command displays the model names and slot assignments of the
management and media converter modules in a chassis, as well as the
chassis’ module name and MAC address. This command does not display
the power supply or fan modules.
This command can display just one chassis at a time. To view all of the
chassis of a stack with one command, use the SYSTEM SHOW
CLUSTER command, as explained in “SYSTEM SHOW CLUSTER” on
page 99.