Diagnostics show bootloader, Figure 42: diagnostics show bootloader command – Allied Telesis AT-S97 User Manual
Page 227
AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
227
DIAGNOSTICS SHOW BOOTLOADER
Syntax
diagnostics show bootloader
Parameters
none
Privilege Levels
Administrator, read-write, and read-only.
Description
This command displays the version number of the software bootloader. If
you contact Allied Telesis Technical Support for assistance, you need to
provide this information. Figure 43 is an example of the DIAGNOSTIC
SHOW BOOTLOADER command.
Figure 42. DIAGNOSTICS SHOW BOOTLOADER Command
Chassis
Chassis
Chassis
MAC
Master
ID
Name
Type
Address
Chassis
-----------------------------------------------------------------
0
AT-MCF2000
11:22:33:44:55:55
Yes
AT-MCF2000
Slot ID
Module Name
Module Type
Software Version
----------------------------------------------------------------------
M
AT-MCF2000M
v2.0.0
1
Reg 1 traf
AT-MCF2012LC
v2.0.0
2
Reg 2 traf
AT-MCF2012LC/1
v2.0.0
1
ACT Traffic
11:22:33:44:22:22
No
AT-MCF2000
Slot ID
Module Name
Module Type
Software Version
----------------------------------------------------------------------
1
Reg 7 traf
AT-MCF2012LC
v2.0.0
2
Reg 12 traf
AT-MCF2012LC
v2.0.0
2
UJ Traffic
11:22:33:44:66:77
No
AT-MCF2000
Slot ID
Module Name
Module Type
Software Version
----------------------------------------------------------------------
1
District 1
AT-MCF2012LC
v2.0.0
2
District 2
AT-MCF2012LC
v2.0.0