Allied Telesis AT-S97 - Manual (Page 204)

Chapter 12: Simple Network Management Protocol (SNMP) Commands
204
If does not matter which community strings you assign to the trap
receivers. When a media converter sends a trap, it looks at all the
community strings and sends the trap to all of the trap receivers on all of
the community strings.
If you are not interested in receiving traps, you do not need to enter the IP
addresses of trap receivers.
Default Community Strings
The AT-S85 and AT-S97 software assigns two default values to the get,
set, and trap community strings: public or private. The public string has an
access mode of Read and the private string has an access of Read and
Write. If you configure SNMP management on the media converter,
change the default value of the set community string from private because
this is a standard community string in the industry.
Command
Summary
Table 15 summarizes the SNMP commands.
Table 15. SNMP Commands
Command Description
“SNMP SET” on page 205 Defines SNMP communities and
manager IP addresses.
SNMP SHOW on page 207 Displays the current settings of the
SNMP feature.