Allied Telesis AT-S97 - Manual (Page 229)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
229
DIAGNOSTICS SHOW CHASSIS
Syntax
diagnostics show chassis id= chassis eeprom
Parameters
id Identifies the ID number of a chassis. The range of chassis
ID numbers is from 0 to 31. To display a unit’s ID number,
use the SYSTEM SHOW CLUSTER command. For
instructions, see “SYSTEM SHOW CLUSTER” on page 99.
eeprom Displays the serial numbers, hardware revision levels, and
MAC addresses of the modules.
Privilege Levels
Administrator, read-write, and read-only.
Description
This command displays manufacturing information about the modules in
the chassis. If you contact Allied Telesis Technical Support for assistance,
you need to provide this information.
Figure 43. DIAGNOSTICS SHOW CHASSIS EEPROM Command
The fields are defined here:
ˆ Slot ID: A slot in the chassis. Possible values are:
– C: Indicates the chassis.
– M: Indicates the management slot for the
AT-MCF2000M Management Module.
– number: A media converter slot number (for example,
1, 2, etc.). Empty slots are not included in the tables.
Slot Module Module Serial HW MAC
ID Name Type Number Rev Address
----------------------------------------------------------------------
C
AT-MCF2000 4 X1 00:15:77:70:7A:2A
M AT-MCF2000M A03678L072000005A A 00:15:77:70:7A:2B
1 AT-MCF2012LC 20 yyyy 00:15:77:70:7A:2F
2 AT-MCF2012LC 14 yyyy 00:15:77:70:7A:22
A AT-MCF2KFAN 8 yyyy
B AT-MCF2000AC A0367G070400086B B