Allied Telesis AT-S97 - Manual (Page 125)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
125
LOGGING DISABLE EVENTLOG
Syntax
logging disable eventlog
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command disables the event log. This stops the management module
from storing any further events, but any events already stored in the log
are retained. To display the current state of the event log or the event
messages, refer to “LOGGING SHOW” on page 132. The default setting
for the event log is enabled.
Example
The following command disables the event log:
logging disable eventlog