Ntp set – Allied Telesis AT-S97 User Manual
Page 118
Chapter 7: Network Time Protocol Commands
118
NTP SET
Syntax
ntp set server=
ipaddress
utcoffset=
integer
Parameters
server
Specifies the IP address of an NTP server.
utcoffset
Specifies the time difference, in hours, between Universal
Time Coordinated (UTC) and local time. The range is
between -12 and +12 hours. The default is 0 hours.
Privilege Levels
Administrator and read-write.
Description
This command specifies the IP address of the NTP server on your network
or the Internet. In addition, this command permits you to adjust the local
time of the media converter according to your local time zone.
Examples
This command specifies the IP address 149.122.55.77 as the NTP server:
ntp set server=149.122.55.77
This command specifies the IP address 149.122.55.79 as the NTP server
with a UTC offset of 3 hours:
ntp set server=149.122.55.79 utcoffset=3
This command specifies the IP address 149.122.55.81 as the NTP server
with a UTC offset of -6 hours:
ntp set server=149.122.55.81 utcoffset=-6