Allied Telesis AT-S97 - Manual (Page 199)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
199
TELNET ENABLE
Syntax
telnet enable
Parameters
None.
Privilege Levels
Administrator and read-write.
Description
This command activates the Telnet server on the management module for
remote Telnet management of the chassis. The default setting for the
server is disabled.
Note
Review “Telnet Server Guidelines” on page 196 for the
preconditions for remote Telnet management. For instructions on
starting a remote session, refer to “Starting a Remote Telnet or
Secure Shell Management Session” on page 22.
Example
The following command enables the Telnet server on the management
module:
telnet enable