Allied Telesis AT-S97 - Manual (Page 154)

Chapter 9: Configuration File Commands
154
CONFIG OVERWRITE
Syntax
config overwrite enable|disable Id=c/s
Parameters
enable Enables the configuration overwrite command. This is the
default value.
disable Disables the configuration overwrite command.
c/s Indicates the chassis and slot.
Privilege Levels
Administrator and read-write.
Description
This command enables or disables the Management module to overwrite
the configuration on the specified Blade module.
This command is useful if you want to retain the auxiliary configuration file
of an media converter module. In this case, you can disable the automatic
overwriting of a media converter module configuration file with the disable
parameter of the CONFIG OVERWRITE command.
Example
The following command disables the Management module ability to
overwrite the configuration on module 2 in chassis 0:
config overwrite disable Id=0/2