Allied Telesis AT-S97 - Manual (Page 177)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
177
0 or 31 The chassis ID numbers are
limited to these values.
slot Identifies the slot number of a module.
Possible values are:
* (asterisk) Indicates all slots in a chassis.
m Identifies the management
module slot.
1 or 2 Specifies a slot number of a
media converter module. In the
AT-MCF2000 Chassis, the left
slot is 1 and the right slot is 2.
bootblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97 boot
loader files.
appblock Designates the area of flash memory
reserved for the AT-S85 and AT-S97
Management Software.
filename.cfg Downloads a master configuration file from
the TFTP server to the file system of the
management module. This parameter
designates a name for the file when the file
is stored in the file system on the module.
The name can be up to 15 alphanumeric
characters, not including the extension.
Enclose the filename in double quotes if it
contains a space. The filename must include
the “.CFG” extension.
To view the ID and slot numbers of a chassis, refer to
“SYSTEM SHOW CHASSIS” on page 96 or “SYSTEM
SHOW CLUSTER” on page 99.
Privilege Levels
Administrator and read-write.