HP 3PAR Operating System Software - Manual (Page 96)

Description Field Group
For fabric attached ports, indicates the VLUN
change notification setting. When set to VCN
Enabled, notices are generated and sent to the
fabric controller. When set to Disabled, no
notification is sent.
Indicates whether the node's WWN is Enabled
or Disabled. Not available for systems running
InForm OS 2.2.4 or lower. Unique Node WWN
If Disabled, each I/O generates a separate
interrupt to the HBA port driver rather than Interrupt Coalesce
generating one interrupt for multiple I/O
completion. Not available for systems running
InForm OS 2.2.4 or lower.
Type of connection (Private Loop, Public Loop,
or Point-Point). Topology Fibre Channel Settings
Identifies which Fibre Channel classes of
service are enabled (2, 3, or 2/3). 2/3 Class
indicates that both Class 2 and Class 3 are
enabled.
Model of the Fibre Channel adapter that
contains the port (for example, QLOGIC
2302). Adaptor Type
Indicates whether port mode change from
initiator to target or vice versa is Allowed or Mode Change
Prohibited. This setting is configured using the
InForm CLI command controlport.
The number of hosts connected to the port. This
is only displayed if the port is connected to
hosts. Hosts
The number of physical disks connected to the
port. This is only displayed if the port is
connected to drive cages. Physical Disks
NOTE: Persona information is not displayed on systems using InForm OS 2.3.1 or higher.
Number for the current port persona setting. Persona Persona (not shown)
Manufacturer of the host computers network
adapter. This value is determined by the port
persona. Vendor
Host computer's network adapter. This value
is determined by the port persona. Adapter Type
Host computers operating system. This value
is determined by the port persona. OS
Indicates whether the connection is Direct
Connect or Fabric Attached, as determined by
the port persona. Connection
When a persona has been edited by a user,
Modified appears in this column. Otherwise,
this column remains blank (--). Modified
Physical Disks
The physical disk port information is presented on the Physical Disks tab.
96 Working with Ports