HP 3PAR Operating System Software - Manual (Page 206)

The following information is displayed in the Path Summary tab:
Description Column
The exported Logical Unit Number (LUN) value. LUN
The name of the exported virtual volume. Each entry is a link to the Virtual Volumes tab. Virtual Volume
The name of the host to which the VLUN is exported. Each entry is a link to the Hosts
tab. Host
The number of host WWNs visible to the system. Host Ports
WWNs reported by the host, but not visible to the system. Inactive Ports
The number of system ports that can see the host. InServ Ports
The total number of distinct, available paths between the host and the system. Available Paths
The number of paths seen by the system reported good by the host. Healthy Paths
The used multi-pathing method. Multipath
The failed path monitoring method. Failed Path Policy
The monitoring interval in seconds after which the host checks for failed paths. Monitoring Interval
The device name for the selected VLUN on the host. Host Device Name
Creating VLUNs
To create a VLUN:
1.
In the Manager Pane, click Provisioning.
2. In the Common Actions Panel, click Create VLUN.
The Export Virtual Volume wizard appears.
3. Follow the instructions in “Exporting Virtual Volumes” (page 152) .
Removing VLUNs
To remove a VLUN:
1.
Access the VLUNs screen.
2. Right-click the VLUN you wish to remove.
NOTE: If you wish to remove multiple VLUNs (see “Selecting Multiple Items” (page 28) ),
select the VLUNs you wish to remove before right-clicking.
3. In the menu that appears, click Remove.
The Remove VLUN(s) dialog box appears.
206 Working with VLUNs