Upper pane – HP 3PAR Operating System Software User Manual
Page 86
The Summary tab is divided into an upper pane and a lower pane. The upper pane displays a
summary of all system ports. The lower pane displays detailed information about a single port
selected from the upper pane.
NOTE:
Port states indicating Loss Sync cannot be distinguished between being disconnected
and a bad connection. Default will display a normal icon indicating the port is healthy. The user
can set the port feature to indicate a failed icon in the event of a Loss Sync by going to the View
menu and selecting Preferences and the Advanced tab and check the Display Loss Sync Port as
Failed.
Upper Pane
The upper pane provides the following information:
Description
Column
Port location.
Position
World Wide Name or Media Access Control address of the connected device.
WWN/MAC
The state of the port. See
“System and Component Status Icons” (page 41)
.
State
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.
Type
Type of device that the port is connected to. Free, Disk, Host, Peer, or InServ.
Connected Device Type
Name of device that the port is connected to, e.g. host1, cage0.
Connected Device
Port firmware mode setting. Ports in Initiator mode are connected to drive cages and
ports in Target mode export to hosts. Suspended mode is for target ports that have not
yet been initialized by the system (rare). Peer mode is for Ethernet ports.
Mode
86
Working with Ports