HP 3PAR Operating System Software - Manual (Page 137)

The following information is provided:
Description Column
The name of the system. System Name (not shown)
The exported LUN value. LUN
The exported volume. Virtual Volume
The name of the host to which the VLUN is exported. Host
WWNs reported by the host, but not visible to the system. Inactive Ports
The number of system ports that can see the host. InServ Ports
The total number of available distinct paths between the host and the system. Available Paths
The number of paths seen by the system and reported "good" by the host. Healthy Paths
The multipathing method in use. Multipath
The failed path monitoring method. Failed Policy Path
The monitoring interval in seconds after which the host checks for failed paths. Monitoring Interval
The device name for the selected VLUN on the host. Host Device Name
Virtual Volumes Details
The virtual volumes detail screen in the lower pane provide detailed information about volumes
selected from the Host Explorer tab in the upper pane.
Virtual volume details appear as follows:
The following information is provided:
Description Column
The volume name. Volume tree depth in parenthesis. Each name is a link to the
virtual volume tab. Name
The domain to which the virtual volume belongs. Domain
The state of the system. See “System and Component Status Icons” (page 41) . State
Indicates if the volume is a base volume, physical copy, or virtual copy. Type
Indicates if the volume is fully (Full) or thinly provisioned (TPVV). Provisioning
The volume's RAID type. RAID
The size of the volume in GiB. Virtual Size
Viewing Host Information 137