HP 3PAR Operating System Software - Manual (Page 55)

Description Field Group
NOTE: The InForm Management Console displays the devices currently installed in your system. For example, if you
do not have Fibre Channel drives installed, the FCRaw Space Alert field will not appear on the Settings tab.
Indicates if the copy space reclaim feature is Enabled or Disabled. Copy Space Reclaim
The set maximum volume retention time. Maximum Volume
Retention Time
The set size of the chunklet (in GiB) of the physical disk. Chunklet Size
Location of the system (if entered). Location Descriptors
The owner of the system (if entered). Owner
Contact information (if entered). Contact
Any notes about the system (if entered). Comments
Radio buttons indicating if you wish to view either IPv4 or IPv6 network
configuration information. If your system is not configured for IPv6, the IPv6
button is disabled. IPv4/IPv6 Network
Configuration
The system's IP address. IP Address
(If IPv4 was selected) The subnet mask. Subnet Mask
(If IPv6 was selected) The decimal value indicating the number of contiguous,
higher-order bits of the address that make up the network portion of the address. Prefix
The active system node. Active Node
The status of the system. Status
The default routing IP address. Default Route
The NTP server, if any. NTP Server
Viewing System Capacity
To view a single system's capacity information, Access the Systems screen and then click the
Capacity tab.
Viewing System Capacity 55