HP 3PAR Operating System Software - Manual (Page 114)

Clearing Port Parameters
NOTE: This operation can only be performed on Remote Copy over Fibre Channel, Remote Copy
over IP, and iSCSI ports.
To clear a port's parameters:
1.
Access the ports Summary tab.
2. Right-click the port to be cleared and then click Clear in the menu that appears.
The Clear Port Configuration dialog box appears.
3. Click Yes.
Resetting a Port
NOTE: This operation cannot be performed on Remote Copy over IP (RCIP) ports.
To reset a port:
1.
Access the ports Summary tab.
2. Right-click the port you wish to reset and then click Reset in the menu that appears.
The Reset Port dialog box appears.
3. (Optional) Select Reload Firmware if you wish to reload the port firmware upon reset.
4. Click Yes.
Setting a Port Offline
NOTE: This operation cannot be performed on Remote Copy over IP ports.
To set a port offline:
1.
Access the ports Summary tab.
2. Right-click the port you wish to set offline and then click Set Offline in the menu that appears.
The Set Offline dialog box appears.
3. Click Yes.
Initializing a Port
NOTE: This operation can only be performed on Fibre Channel and Remote Copy over Fibre
Channel (RCFC) ports.
To initialize a port:
1.
Access the ports Summary tab.
2. Right-click the port you wish to initialize and then click Initialize in the menu that appears.
The Initialize Port dialog box appears.
3. Click Yes.
Synchronizing a Port with the Name Server
NOTE: This operation can only be performed on Fibre Channel and Remote Copy over Fibre
Channel (RCFC) ports.
To synchronize a port with the name server:
1.
Access the ports Summary tab.
114 Working with Ports