HP 3PAR Operating System Software - Manual (Page 270)

2. In the IP Settings groups for each system/port, all fields are automatically populated based
on the link relationship you established under Create Links.
3. (Optional) Enter the gateway address for each system/port.
4. (Optional) Click Apply to test the link configuration, or Ping to test the communication between
the links.
5. Click Finish.
Editing Remote Copy Targets
To edit a Remote Copy target:
1.
Access the Remote Copy Targets screen.
2. Right-click the Remote Copy target you wish to edit, and then select Edit Target.
The Edit Remote Copy Target dialog box appears.
3. Click Advanced.
4. Enter a value in the Bandwidth field.
5. Enter a value in the Latency field.
6. Click OK.
Removing Remote Copy Targets
To remove a Remote Copy target:
1.
Access the Remote Copy Targets screen.
2. Select one or more Remote Copy targets to remove.
3. Right-click the selection, and then select Remove Target.
The Remove Remote Copy Target dialog box appears.
4. (Optional) If you wish to remove Remote Copy groups associated with the selected target(s),
and dismiss the target(s) from groups with additional targets, select Remove or dismiss targets
from groups.
5. Click OK.
270 Working with Remote Copy Targets