HP 3PAR Operating System Software - Manual (Page 101)

Description Field Group
Connection type or port connection setting (Loop, Point, or
Loop-point). When the port is set to Loop-point, both loop and
point-to-point connections are enabled. Connection Type
Data transfer rate setting (for example, 1 Gbps). Auto indicates that
the system automatically selects the rate. Configured Rate
Maximum rate of connection from the port. Max Rate
Indicates whether Fibre Channel service Class 2 is Disabled, Ack 1
or Ack 0. Class 2
For fabric attached ports, indicates the VLUN change notification
setting. When set to Enabled, notices are generated and sent to the
fabric controller. When set to Disabled, no notification is sent. VCN
Indicates whether the node's WWN is Enabled or Disabled. Not
available for systems running InForm OS 2.2.4 or lower. Unique Node WWN
If Disabled, each I/O generates a separate interrupt to the HBA port
driver rather than generating one interrupt for multiple I/O Interrupt Coalesce
completion. Not available for systems running InForm OS 2.2.4 or
lower.
Type of connection (Private Loop, Public Loop, or Point-Point). Topology Fibre Channel
Settings
Identifies which Fibre Channel classes of service are enabled (2, 3,
or 2/3). 2/3 indicates that both Class 2 and Class 3 are enabled. Class
Model of the Fibre Channel adapter that contains the port (for
example, QLOGIC 2302). Adaptor Type
World Wide Name of the remote port. Remote Port WWN
World Wide Name of the remote node. Remote Node WWN
Indicates whether port mode change from initiator to target or vice
versa is Allowed or Prohibited. This setting is configured using the
InForm CLI command controlport. Mode Change
The state of the link. Link State
NOTE: Persona information is not displayed on systems using InForm OS 2.3.1 or higher.
Number for the current port persona setting. Persona Persona (not
shown)
Manufacturer of the host computers network adapter. This value is
determined by the port persona. Vendor
Host computer's network adapter. This value is determined by the
port persona. Adapter Type
Host computers operating system. This value is determined by the
port persona. OS
Indicates whether the connection is Direct Connect or Fabric
Attached, as determined by the port persona. Connection
When a persona has been edited by a user, Modified appears in
this column. Otherwise, this column remains blank (--). Modified
SFP
The RCFC SFP information is presented on the SFP tab.
Viewing System Ports 101