HP 3PAR Operating System Software - Manual (Page 82)

Description Column
Status of the Interface Card loop (A) to the node. Loop A State
Status of the Interface Card loop (B) to the node. Loop B State
Viewing Drive Cage Physical Disks Details
To view physical disk details:
1.
Access the Drive Cages screen.
2. In the upper pane of the Drive Cages screen, click the Summary tab and then click a drive
cage.
3. In the lower pane, click the Physical Disks tab.
The Physical Disks tab appears as follows:
The following information is provided:
Description Column
Physical disk ID, as assigned by the system. For unadmitted disks, this columns is blank
(--). ID
Location of the disk in the format: N:S:P (Node:Slot:Port). Position
The World Wide Name (WWN) assigned to the disk. WWN
Current state of the disks. Status LED (for DC1, DC2, and
DC4 drive cages)
Current internal temperature of the disk drive. Temperature
The loop A arbitrated loop physical address of the disk. Loop A AL_PA
Status of the Interface Card loop to the node. See “System and Component Status
Icons” (page 41) .
Loop A State
The loop B arbitrated loop physical address of the disk. Loop B AL_PA
Status of the Interface Card loop to the node. See “System and Component Status
Icons” (page 41) .
Loop B State
Status of the physical disk. See “System and Component Status Icons” (page 41) . State
State of the ESI (Enclosure Services Interface). See “System and Component Status
Icons” (page 41) .
ESI State (for DC2, DC3, and
DC4 drive cages)
82 Working with Drive Cages