HP 3PAR Operating System Software - Manual (Page 143)

Description Column
The number of system ports that can see the host. InServ Ports
The total number of available distinct paths between the host and the system. Available Paths
The number of paths seen by the system and reported "good" by the host. Healthy Paths
The multipathing method in use. Multipath
The failed path monitoring method. Failed Policy Path
The monitoring interval in seconds after which the host checks for failed paths. Monitoring Interval
The device name for the selected VLUN on the host. Host Device Name
Viewing Unassigned Paths
To view unassigned host paths:
1.
In the Manager pane, click Hosts.
2. In the Management tree, click Unassigned under the Paths node of the system that contains
the unassigned host paths you wish to view.
The Unassigned paths screen appears as follows:
The information presented in the Unassigned paths screen is split into and upper pane and lower
pane, and is identical to the information displayed in the Paths screen.
Viewing Host Sets
To view a summary of host sets:
1.
In the Manager pane, click Hosts.
2. In the Management tree, click Host Sets under the Hosts node for system that contains the host
sets you wish to view.
The Host Sets summary screen appears as follows:
Viewing Unassigned Paths 143