HP 3PAR Operating System Software - Manual (Page 75)

The upper half of the SFPs tab displays summary SFP information. The lower half of the SFPs tab
displays detailed information about a selected SFP from the upper pane.
The following information appears in the upper tab:
Description Column
Interface card number, as assigned by the system. Interface Card
SFP number, as assigned by the system. SFP
The drive cage state. See “System and Component Status Icons” (page 41) . State
The SFP manufacturer. Manufacturer
The maximum speed of the SFP in Gbps. Max Speed
Displays whether the transmit laser is disabled. TX Disable
Displays whether the transmit laser has a problem. TX Fault
Displays whether the receive end of the SFP is experiencing a loss of signal
from the host or drive cage. RX Loss
Displays whether the SFP receive power is low. RX Power Low
Displays whether the SFP is DDM-capable (Digital Diagnostic Monitoring). DDM Support
Viewing Drive Cages 75