HP Surestore Disk Array 12h and FC60 - Manual (Page 356)

356 Support Tools Manager
Running Expert Tool in Menu Mode
1. At the system prompt:
– Type mstm
– Select Ok
2. To select the disk array:
– Scroll down using the arrow key, select A5277A ARRAY.
– Press
3. To run the Expert tool:
– Select Menubar on or use arrow keys to get to Menubar
– Select Tools
– Select Expert Tool
– Select Run
4. Perform the desired operation using the Expert Tool menus. The Expert Tool menu
options are listed in Table 46 .
5. To exit Expert Tool:
– Select Menubar on or use arrow keys to get to Menubar
– Select File
– Select Exit
– Select Yes
Expert Tool Menu Options (xstm and mstm)
When using xstm or mstm, all Expert Tool functions are accessed from a series of menus.
The menus options are described in
Table 46 .