HP Surestore Disk Array 12h and FC60 - Manual (Page 340)

340 Status Conditions and Sense Code Information
8B 02 Quiescence Is In Progress or Has Been Achieved
8B 03 Quiescence Could Not Be Achieved Within the Quiescence
Timeout Period
8B 04 Quiescence Is Not Allowed
8E 01 A Parity/ Data Mismatch was Detected
The controller detected inconsistent parity/data during a parity
verification.
91 00 General Mode Select Error
An error was encountered while processing a Mode Select
command.
91 03 Illegal Operation for Current Drive State
A drive operation was requested through a Mode Select that
cannot be executed due to the state of the drive. An example
would be a Delete Drive when the drive is part of a LUN.
91 09 Illegal Operation with Multiple SubLUNs Defined
An operation was requested that cannot be executed when
multiple SubLUNs are defined on the drive.
91 33 Illegal Operation for Controller State
The requested Mode Select operation could not be completed
due to the current state of the controller.
Table 44 SCSI Sense Codes (cont’d)
Additional
Sense
Code Additional
Sense Code
Qualifier
Interpretation