HP Surestore Disk Array 12h and FC60 - Manual (Page 28)

28 Disk Enclosure Components
Figure 4 Disk Module
Disks fit snugly in their slots. The cam latch (B in Figure 4 ) is used to seat and unseat the
connectors on the backplane.
A label (G) on the disk provides the following information:
• Disk mechanism height: 1.6 inch (half height) or 1 inch (low profile)
• Rotational speed: 10K RPM and 15K RPM (18 Gbyte only)
• Capacity: 9.1 Gbyte, 18.2 Gbyte, 36.4 Gbyte, or 73.4 Gbyte
A large zero on the capacity label distinguishes a filler from a disk. Fillers are required in all
unused slots to maintain proper airflow within the enclosure.
C AUTION
Fillers must be installed in unused slots to maintain proper cooling within
the disk enclosure.
A bezel handle
B cam latch
E circuit board
C carrier frame F insertion guide
D standoffs G capacity label