HP Surestore Disk Array 12h and FC60 - Manual (Page 166)

166 Installing the Disk Enclosures
Step 5: Install Disks and Fillers
C AUTION
Touching exposed areas on the disk can cause electrical
discharge and disable the disk. Be sure you are grounded
and be careful not to touch exposed circuits.
Disks are fragile and ESD sensitive. Dropping one end of the disk two inches is enough to
cause permanent damage. Static electricity can destroy the magnetic properties of
recording surfaces. Grip disks only by their handles (B in
Figure 60 ) and carriers, and
follow strict ESD procedures.
Figure 60 Disk Installation
A disk enclosure door E disk carrier
B disk handle F insertion guide
C cam latch G slot guide
D ESD plug H slot number